Anyone know if the gill's or any other aftrermarket stuff will clear 33inch centers ?????

What's the standard spread for the Bravo's????

There's are pair of Gil's listed under parts for sale with silent choise. $1500 for the pair. You'd probably be able to sell the riser's

33" spread
 

Being that you have trs, and depending how long thwe risers are you should have a fair amount of rubber exhaust hose from riser to the tip. Not that its very flexible but it should spread 1.5 inches. Even if i had to cut and weld the end of the tip on a small angle to make sure that no water leaks, it's cheaper than getting a custom set of exhaust made up for now, i just keep thinking do it cheap and decent to get you going then decide what you really want as your having a couple of drinks on the water this summer.
I paid bigmoney for a set of ' rebuilt motors' and they're now in getting done properly after just 40hrs. It doesn't sound like the seller knew too much about yours to begin with, could have just been a Varsol overhaul. :(
If you're going to do any salt water running i was told to stay away from the cheaper lightnings (1600 $) the inner tube is stainless while the outer is steel. In order to get both stainless you have to pay ---$2100/pr

What i'm worried about , is the center two manifolds touching each other..... anyone know if these after market manifolds will clear each other with 33'' centers????

are you talking 33" centers between one motors tips ? That's not what matters , it's the center to center between motors--- what's that???

the measurement from center to center of the engines in the boat
is only 33" , from what i understand most twins are 35 - 36"
centers

I stand corrected -- just went out and measured, 28" per motor is somewhat standard, and with 36" center of motor to center of motor i have 6" between the Imco's. Hope that helps. Dave

Mine are at 33" centers and I have gils, there is 1/4' between the manifolds. They are not fun to get on and off but it can be done. I now just pull the motor, manifolds and all.

Yes that helps thx guys