my motors
#14
Registered
Those heads may actually make more power on a 454 than square ports. Under 500 ci. square ports are overkill. The rest of your parts sound good. Those motors will make over 400 hp. Except for those wierd exaust manifolds???
#15
Registered
Thread Starter
Join Date: Jul 2002
Location: Hudson Valley
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
40scarab, no i'm not using those log manifolds, i'm buying
a set of bassett offshore headers used,they were on a 540 / 680 hp blocks
they look new( they are prob overkill for my application but i don't think they will hurt?
jaf302, ah your real close, a 79nova 250 was my very first boat
had alot of good times on that boat....
a set of bassett offshore headers used,they were on a 540 / 680 hp blocks
they look new( they are prob overkill for my application but i don't think they will hurt?
jaf302, ah your real close, a 79nova 250 was my very first boat
had alot of good times on that boat....
#17
Registered
Thread Starter
Join Date: Jul 2002
Location: Hudson Valley
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
i made a mistake, the heads are 049, the casting made the 9 look like an 8...... any other cam suggestions????
should i use the 850 hollys or the Q jets????
should i use the 850 hollys or the Q jets????
#18
Registered
Thread Starter
Join Date: Jul 2002
Location: Hudson Valley
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
heres the headers
stainless steel offshore headers
Straight out tailpipes
19.5 above cranckshaft center line
33" engin centers
Valve covers can be removed
with headers bolted in place
stainless steel offshore headers
Straight out tailpipes
19.5 above cranckshaft center line
33" engin centers
Valve covers can be removed
with headers bolted in place