![]() |
What is the best way to check plugs?
I had the carbs rebuilt by Nickerson this winter. I have yet to water test the boat but when I do, what is the best way to check the plugs after a WOT run? I have read/heard to shut down at WOT throttle to check, but that does not sound good to me. Do I back off quickly, then shut them down and check?
I know this question sounds a little dumb but...... Thanks |
Just pull the throttle back like you normally would come down to idle and shut the motor off.
|
Cool, thanks
|
| All times are GMT -5. The time now is 08:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.