My boat is taking on water
06-11-2003 | 10:41 PM
#13
Registered
Joined: Dec 2002
Posts: 3,705
Likes: 0
From: Kankakee Illinois
Originally posted by OTIS311
Roger1, You looking to trade that Mate in ?? See my post in the Baja forum. I am willing to take a trade for a smaller, quality performance boat in good shape on my 2001 29 Outlaw SST.
5 YEAR WARRENTIES, with trailer and all the goodies Baja has to offer ont he Boat for under $80k and Ill take a trade
Cant beat that !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!
Roger1, You looking to trade that Mate in ?? See my post in the Baja forum. I am willing to take a trade for a smaller, quality performance boat in good shape on my 2001 29 Outlaw SST.
5 YEAR WARRENTIES, with trailer and all the goodies Baja has to offer ont he Boat for under $80k and Ill take a trade
Cant beat that !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!
06-12-2003 | 06:36 AM
#15
Thread Starter
Registered
Joined: Jan 2001
Posts: 5,199
Likes: 5
From: FLORIDUH
Rick, Iam going to the Northshop to try that right now, I am still planing on going to te run. So tel Sfari to sleep at your house on FridayNight so you can wake his ass up at 0430
The only draw back is going to be the weather, As you know,, I must behome fo Sunday afternoon. So I am watching it VERY close
Bob
The only draw back is going to be the weather, As you know,, I must behome fo Sunday afternoon. So I am watching it VERY close
Bob
06-12-2003 | 06:49 AM
#16
Registered
Joined: Apr 2001
Posts: 1,464
Likes: 0
From: Annapolis MD
Originally posted by Roger 1
Bob;
Have you had any luck finding the leak? Let us know. The alternative to repairing it is to trade it to me for my Checkmate and let me worry about the leak while your on the NYC poker run.
Bob;
Have you had any luck finding the leak? Let us know. The alternative to repairing it is to trade it to me for my Checkmate and let me worry about the leak while your on the NYC poker run.
-Greg
06-12-2003 | 08:05 AM
#18
Thread Starter
Registered
Joined: Jan 2001
Posts: 5,199
Likes: 5
From: FLORIDUH
More info, I put the boat on the hose and ran it .NO WATER !!
When you float the boat, it instantly starts leaking righ from behind the coupler area. You cant see exactly from where because its so tight, but thats where it is presenting itself
HELP
When you float the boat, it instantly starts leaking righ from behind the coupler area. You cant see exactly from where because its so tight, but thats where it is presenting itself
HELP
06-12-2003 | 08:42 AM
#19
Registered
Joined: Oct 2000
Posts: 4,000
Likes: 0
From: USR, NJ
Bob.
Im going with the transom assembly seal. Did you try to tighten up the assembly?
Or like Obnoxus pionted out the Swivel shaft seel. When the hydrolic rams are attached it is very hard to detect play in the assembly. I found mine was shot when I disconected the ram to swap out the drive this winter.
I would definatly want to know where its comming from before you run it again so you can keep an eye on it.
Im going with the transom assembly seal. Did you try to tighten up the assembly?
Or like Obnoxus pionted out the Swivel shaft seel. When the hydrolic rams are attached it is very hard to detect play in the assembly. I found mine was shot when I disconected the ram to swap out the drive this winter.
I would definatly want to know where its comming from before you run it again so you can keep an eye on it.
06-12-2003 | 08:54 AM
#20
Registered
Joined: Dec 2002
Posts: 3,705
Likes: 0
From: Kankakee Illinois
Originally posted by GregP
Gee Rodger, havn't you broken down and order a new Gun yet ??? Time to get the economy "jump started" you know.
-Greg
Gee Rodger, havn't you broken down and order a new Gun yet ??? Time to get the economy "jump started" you know.
-Greg
I need to get my economy ''jump started'' first. Also,In order for this to happen I`m afraid that the ''Little Red Car'' Is going to have to go down the road.
__Roger
