Bravo 1 tech question
06-13-2003 | 03:44 PM
#1
Guest
Posts: n/a
Bravo 1 tech question
I have a 1995 complete lower unit, and have purchased a 2000 Bravo 1 lower. Will the 2000 lower bolt up to my intermediate section???
From looking at the parts diagrams, it looks like the 2000 lower has a small o-ring protected port running (oil??) from the lower into the intermediate section; and I don't think that port exists on my intermediate housing. I fear the small port will allow oil to pour up into the water jacket / port in the intermediate section.
Help!!!
MAV
From looking at the parts diagrams, it looks like the 2000 lower has a small o-ring protected port running (oil??) from the lower into the intermediate section; and I don't think that port exists on my intermediate housing. I fear the small port will allow oil to pour up into the water jacket / port in the intermediate section.
Help!!!
MAV
06-13-2003 | 05:43 PM
#2
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
There is a difference ,you need to look and see if the line up.i think on the newer md its for oil flow.On my B-Max,s they where plugged.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Thread
Thread Starter
Forum
Replies
Last Post
cherrycobalt262
General Boating Discussion
4
04-04-2008 12:22 PM
