Need isntallation manual for B&M 174
 

Does anyone have an installation manual for a B&M 174 out there? If you have it in an electronic format and could email it that would be great. Thanks.

Chris

I don't have any instructions, but what info are you looking for??? Its a pretty straight forward install.
Bolt on the intake
Bolt on the blower
Bolt on the tensioner (if its separate from the blower
Bolt on the lower crank pulley
Fill the gear lube to proper levels using sight holes
Bolt on the carb
Attach the belt
Test the set up

info...
 

Torque specs, that kind of thing...

duunoit The blower shop has it on there web site www.theblowershop.com

I sent you an e-mail.
Russ

duunoit,
I had one, I'll look and see. The Intake is torqued just like regular intake. When you bolt the blower on it's 10 ft.lbs. or 120 inch pounds. Criss-cross when you tighten and work up to 120. I always started at 40 in. lbs. then 80 then 120 turning the blower while tightening. Mine never got tight but a friends did and left it loose ind wear in a little then tightened up all the way.
Mike

just about neighbors
 

goob,
I see that you live in Franklin. My dad just bought a house out there. It is near La Hacienda.
RLW said that he has a copy that he is going to email me but your more than welcome to email it to me also. Thanks.

Chris

Chris, I need your mailing address so I may mail it to you via the post office/snail mail.
Russ

Chris, I live off the Goosecreek exit of 65. If you want e-mail me your number and I'll call you and talk to you. I think I still have a pully for a 174.
[email protected]
Mike