|
Re: Merc water pressure relief valve
My pressure was pinned at 35, after installed not over 25 and after removing the thermostat no water pressure.Waters 120 and oil temp takes awhile to come up to operating temp.Looking to install oil thermostats now.
|
Re: Merc water pressure relief valve
Direction is "either"
Make sure you put it just before the crossover so that you don't loose good water flow to your oil and PS coolers. If you put it before the coolers the cooling capacity of the coolers will diminish greatly. |
Re: Merc water pressure relief valve
Originally Posted by Faster!
I put mine between the sea water pump and crossover.
|
Re: Merc water pressure relief valve
Originally Posted by NordicHeat
Direction is "either"
Make sure you put it just before the crossover so that you don't loose good water flow to your oil and PS coolers. If you put it before the coolers the cooling capacity of the coolers will diminish greatly. |
Re: Merc water pressure relief valve
Originally Posted by US1 Fountain
Where did you dump the water?
Yes put it in after the coolers. Merc sends a little instruction sheet along with the part and they recommend after the cooler. |
Re: Merc water pressure relief valve
Must use a full 1" dump.
I dump mine right on top of the outdrive :) |
TTT For Bad Medicine
|
Originally Posted by klaw
(Post 632049)
I know this topic has been long and a few guys have made there own water dump systems with the one now available from merc for about $100 has any one used these looks like a nice package
Merc Water pressure relief valve 863208a3 I am about to buy a couple |
Bam has it for $275. Lot of money for plastic..
Is there decent alternative out there? |
[QUOTE=Mr Gadgets;2539601]Bam has it for $275. Lot of money for plastic..
QUOTE] Agreed, but whats your engine worth? |
| All times are GMT -5. The time now is 03:32 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.