Offshoreonly.com - Spun a coupler

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Spun a coupler (https://www.offshoreonly.com/forums/general-q/55463-spun-coupler.html)

GLH	07-26-2003 01:45 PM

Spun a coupler

1 Attachment(s)

Any Merc wiz could tell me the diff between old still coupler part #861523A9 and new one #861523A7 apart form the $50 or so.

And how come the new is not listed for the 502 Mag MPI I have but I read here it works.
Thanks for the help and here is the usuall paiment for advice!

Scott B

07-26-2003 03:50 PM

710-861523A 9 is $309.17 Listed for non hi po..

710-861523A 7_ is $373.78. Listed for 8.2HO only..

710-861523A11 is $442.58. Listed for Hi po and trawlers..

Scott B

Scott B

07-27-2003 02:46 PM

Quote:

Originally posted by Troutly
GLH....since you have a trawler you need this one :D

Too funny.. Yup, the boys at Merc have decided our performance boats put the same stresses on the couplers as a trawler. God help us all :eek:

Scott B

Treadwellmotorsports

07-28-2003 08:36 AM

lets see five times as heavy. seems the same to me.

Treeadwell

GLH	07-28-2003 10:25 AM

Quote:

Originally posted by Troutly
GLH....since you have a trawler you need this one :D

Careful about qualifying statements your only 900 pounds behind me!!!
Here's the tip!
http://www.nwoffshore.com/photopost/...nibabes011.jpg

otis311

07-28-2003 08:21 PM

GL You gonna be ready by this Friday ole pal ?? The engine will take you about 2 hours Tops to pull out of the boat and get the coupler off. Not that difficult at all. Let me know if you need anything ok

Bob

GLH	07-28-2003 08:41 PM

Bob,
All set thanks for the offer however, it should be ready tomorrow night.

All times are GMT -5. The time now is 07:49 PM.