Spun a coupler

Reply Subscribe

Thread Tools

07-26-2003 | 01:45 PM

GLH

Thread Starter

Platinum Member

Joined: Dec 2002

Posts: 15,270

Likes: 21

From: Burlington, VT

Spun a coupler

Any Merc wiz could tell me the diff between old still coupler part #861523A9 and new one #861523A7 apart form the $50 or so.

And how come the new is not listed for the 502 Mag MPI I have but I read here it works.
Thanks for the help and here is the usuall paiment for advice!

Attached Thumbnails

07-26-2003 | 03:50 PM

Scott B

Registered

Joined: Dec 2000

Posts: 2,922

Likes: 5

From: Slightly North of Cuba

710-861523A 9 is $309.17 Listed for non hi po..

710-861523A 7_ is $373.78. Listed for 8.2HO only..

710-861523A11 is $442.58. Listed for Hi po and trawlers..

Scott B

07-27-2003 | 02:46 PM

Scott B

Registered

Joined: Dec 2000

Posts: 2,922

Likes: 5

From: Slightly North of Cuba

Quote:

Originally posted by Troutly
GLH....since you have a trawler you need this one

Too funny.. Yup, the boys at Merc have decided our performance boats put the same stresses on the couplers as a trawler. God help us all

Scott B

07-28-2003 | 08:36 AM

Treadwellmotorsports

Registered

Joined: Feb 2001

Posts: 513

Likes: 1

From: EGG HARBOR TOWNSHIP, NJ

lets see five times as heavy. seems the same to me.

Treeadwell

07-28-2003 | 10:25 AM

GLH

Thread Starter

Platinum Member

Joined: Dec 2002

Posts: 15,270

Likes: 21

From: Burlington, VT

Quote:

Originally posted by Troutly
GLH....since you have a trawler you need this one

Careful about qualifying statements your only 900 pounds behind me!!!
Here's the tip!

07-28-2003 | 08:21 PM

otis311

Registered

Joined: Jan 2001

Posts: 5,199

Likes: 5

From: FLORIDUH

GL You gonna be ready by this Friday ole pal ?? The engine will take you about 2 hours Tops to pull out of the boat and get the coupler off. Not that difficult at all. Let me know if you need anything ok

Bob