SPARE ALUMINUM
 

PROPS ON SALE NEW 95.00

Can someone please post before and after results from their Accelerator prop? So far the only delivery I've seen is by UPS.:D

Try this

http://pub47.ezboard.com/fteambajama...icID=415.topic

Darin are yoiur props datalogged into a computer? I was just wondering how you guys get all of the blades identical. Thanks greg

A computer is no match for Darin's "lucky finger" !! :D

Darin I am buying a new boat and it has "Mach Stern Driver" props on it, I have never heard of these, they are 22x14.5 4-blades, thay are on a 30' scarab center console with twin johnson 250s , are these a good prop? what prop would work the best on this hull? am I loosing speed with 4-blade props?

Mach props
 

are the props turning in the rpm range of the motors??

Johnson only built a v-6 250 outboard in 98 and all the others are v-8 outboards you should be spinning around 5,800 max rpm.four blades always run a little slower but you may need them on your set-up.Handling is alot better with four blades especially in rough water ,Mach props are ok.they are weld on blades and I have seen several sets where the blades are not set all the same ,The omc offshore series four blade Renegade would be your best all around prop.give me a call and we can talk more about what you have .Thanks Darin;)

the motors turn around 5500 RPM, the motors are 1994s with low hours and run great, so what type of improvement would I see with OMC renegades? is it a noticeable improvement?

Darin can you make Accelerators out of standard Mirage solid hubs?

Mirage or Mirage Plus
 

yes,we can do the ACCLETRATOR design on either.