biggest cam for merc 454-330

Reply Subscribe

Thread Tools

01-25-2002 | 12:11 PM

#31

Jayl13

Thread Starter

Registered

Joined: Aug 2001

Posts: 1,842

Likes: 0

From: Boynton Beach FLORIDA!!!!

Got a link to a site that sells these dry headers and pipes?
so I can understand this a little more?
cause im in love with the fact that there are no emissions on this thing and it has twin big blocks HEHEHEHE
but my car is choked to death and runs cleaner than this
Go figure
Thanks
Jason

01-25-2002 | 12:15 PM

#32

KCHOTBOAT

Charter Member #737

Joined: Jan 2001

Posts: 1,490

Likes: 79

From: LOTO 31 mm

If you want dry exhaust lightning will build you a set for 1400 to 1600.
Check www.cpperformance.com or IMCO

[ 01-25-2002: Message edited by: KCHOTBOAT ]

01-26-2002 | 12:20 PM

#33

IRONMAN

Charter Member

Joined: Jan 2001

Posts: 1,237

Likes: 2

From: south east of dome island

Also remember to not go too crazy with lift unless you will be changing the exhaust valves. The stockers are probably the weakest link in the 330 motor. The Ironman.

01-26-2002 | 05:39 PM

#34

turbo2256

Guest

Posts: n/a

I would change out the whole valve train the only otherweak link is the pistons the rest isn,t all that bad. If you want good rocker adj nuts go with the ARP stuff studs and all

01-26-2002 | 05:40 PM

#35

turbo2256

Guest

Posts: n/a

I would change out the whole valve train the only otherweak link is the pistons the rest isn,t all that bad. If you want good rocker adj nuts go with the ARP stuff studs and all