Trim Tab Indicator retrofit
01-27-2002, 11:07 AM
#1
Platinum Member
Platinum MemberThread Starter
Join Date: May 2001
Location: Candlewood Lake, CT
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Trim Tab Indicator retrofit
My boat has factory installed bennet trim tabs with no trim level indicators. What is involved in retro fitting the console mount trim indicators?
I'm more specically interested if there is any thru hull drilling involved to mount the trim adjustment senders.
Jamal
I'm more specically interested if there is any thru hull drilling involved to mount the trim adjustment senders.
Jamal
01-27-2002, 03:10 PM
#2
Registered
Join Date: Mar 2001
Location: ohio
Posts: 2,558
Likes: 0
Received 0 Likes
on
0 Posts
The changeover is easy. One more hole to drill for the wires that come through the end cap of the cylinder. Go to Bennetts site or boatered engine section and ask for Tabman.
01-27-2002, 07:01 PM
#4
Registered
Join Date: Mar 2001
Location: ohio
Posts: 2,558
Likes: 0
Received 0 Likes
on
0 Posts
Opppss sorry Sometimes I assume too much. heres the site. http://www.boatered.com/forum.asp?FORUM_ID=3
Tabman works for Bennett. He is one of the nicest, most helpful people ever.
Tabman works for Bennett. He is one of the nicest, most helpful people ever.
