|
Comedics
|
Originally posted by 38KV What is the difference between #1410 and #1411? |
Here is a description of the 1410,1411 and 1412 gaskets.
http://shop.store.yahoo.com/gofast/headexgas1.html BT :cool: |
This should help. I installed the 1410's on my stock heads last year. I think all of the above mentioned will work fine
I found this on http://www.wisespeedshop.com/Fel-Pro.htm #1410 Big Block Chevy-1.88'' x 1.88'', Square, Stock & Early Aluminum Heads - $18.21 #1411 Big Block Chevy-1.94'' Dia., Round, Most OE Aluminum Heads - $18.21 #1412 Big Block Chevy-2.13'' Dia., Round, Large Race - $18.21 |
Just make sure to use Square on Square and so on. I used 1411 (rounds) on stock iorn heads with my Sanderson and 1/2 of the leaked :( replaced a month later with 1410 and all was good :D Rag's
|
I've been using graphite Mr Gasket.
They have hangers on them so they are easy to install. Never any leakage issues. |
Originally posted by Payton I checked this moring with my local auto parts store. They canget the Graphite impregnated sandwiched gasket that Gil Gil sells for $24, for $13. |
JUST TRY THE MR GASKETS GRAFITE.
Believe me you won't want anything else. |
Originally posted by Tinkerer JUST TRY THE MR GASKETS GRAFITE. Believe me you won't want anything else. |
| All times are GMT -5. The time now is 09:29 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.