Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Fiberglass Air Scoop (https://www.offshoreonly.com/forums/general-q/73620-fiberglass-air-scoop.html)

MY OBSESSION 03-09-2004 12:52 PM

Fiberglass Air Scoop
 
I AM GOING TO INSTALL A SUPERCHILLER ON MY 525SC AND THE ENGINE IS GOING TO BE TALLER THAN THE ENGINE HATCH. DOES ANYONE KNOW WHERE I CAN PURCHASE A FIBERGLASS AIR SCOOP THAT CAN BE INSTALLED ON TOP OF THE ENGINE HATCH??

P Offshore 03-09-2004 01:01 PM

Look Here!

MY OBSESSION 03-09-2004 01:14 PM

THANKS VERY MUCH; LOOKS LIKE A GOOD PLACE TO START LOOKING.

Cord 03-09-2004 01:29 PM

Just don't let people step on them.

KCHOTBOAT 03-09-2004 01:51 PM


Originally posted by Cord
Just don't let people step on them.
I put so much fiberglass in mine I can sit on it. I could have bought a couple for what I spent on resin and fiberglass.

GLH 03-09-2004 01:51 PM

Eddie Marine has some in there catalog then I imagine their web site

KCHOTBOAT 03-09-2004 02:09 PM

They run around $250 to $300 at a local speed shops. Local boat paint guy wanted around $900.00 to re enforce and paint.

aero-offshore 03-09-2004 02:59 PM

I bought mine from Summit Racing for around 200.00 rivited it down and glass it up from underneth and left the top alone because the sun pad covers around it.

Team Reyco 03-09-2004 05:21 PM

Bought a Harwood Scoop from Summit also. ;-)

KNOT-RIGHT 03-09-2004 06:46 PM

1 Attachment(s)
these scoops were bought from summit for 170 dollars each.( Harwoods) I went to the parts store got some fiberglass mat with some resin. Reinforced the under sides of each.
Painted them to match the boat.

Approx cost entire project. $400.00

Do it your self and save.
Gerry

28SCARAB 03-09-2004 07:40 PM

Bought mine from Jeg's. I got the harwood bolt-on aero scoop $215. This way I can alway's change it . Just send it out and get it painted and cut and fit your sunpad

P Offshore 03-10-2004 03:49 AM

Gerry, those look good!!!
Did you ever get your sea strainers?

KNOT-RIGHT 03-10-2004 06:44 AM


Originally posted by P Offshore
Gerry, those look good!!!
Did you ever get your sea strainers?


No I still need a set. I am waiting for Randy at cobra hes checking to see if he has some.

I just bought the intercoolers from him so He said he would hook me up.

I was unable to upload your images.
Thanks again for your reply
Gerry

dyno 03-10-2004 07:01 AM

sniff....sniff...my wife wont let me have some!!!!:mad: :mad:

Bad to the bone 03-10-2004 08:01 AM

scoops
 
I have two harwood scoops that i bought for my cig
too short so i bought taller ones cost 350.00 sell
200.00 brand new. Had my painter line with fiberglass.
This is a must.

ren3 03-10-2004 11:39 AM

There is a fabricator in Sebring, Fl. that sells strong scoops for $100 apiece. He used to sell on ebay. I bought two from him and you can sit on them out of the box. Sorry that I do not have any contact info. Actually just look under "fiberglass hood scoop" on ebay and you will see them. Seller is "witchblade**" on ebay I think.


All times are GMT -5. The time now is 10:25 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.