MY OBSESSION

I AM GOING TO INSTALL A SUPERCHILLER ON MY 525SC AND THE ENGINE IS GOING TO BE TALLER THAN THE ENGINE HATCH. DOES ANYONE KNOW WHERE I CAN PURCHASE A FIBERGLASS AIR SCOOP THAT CAN BE INSTALLED ON TOP OF THE ENGINE HATCH??

P Offshore

Look Here!

MY OBSESSION

THANKS VERY MUCH; LOOKS LIKE A GOOD PLACE TO START LOOKING.

Cord

iTrader: (2)

Just don't let people step on them.

KCHOTBOAT

I put so much fiberglass in mine I can sit on it. I could have bought a couple for what I spent on resin and fiberglass.

GLH

Eddie Marine has some in there catalog then I imagine their web site

KCHOTBOAT

They run around $250 to $300 at a local speed shops. Local boat paint guy wanted around $900.00 to re enforce and paint.

aero-offshore

I bought mine from Summit Racing for around 200.00 rivited it down and glass it up from underneth and left the top alone because the sun pad covers around it.

Team Reyco

Bought a Harwood Scoop from Summit also. ;-)

KNOT-RIGHT

these scoops were bought from summit for 170 dollars each.( Harwoods) I went to the parts store got some fiberglass mat with some resin. Reinforced the under sides of each.
Painted them to match the boat.

Approx cost entire project. $400.00

Do it your self and save.
Gerry