Does anyone know this engine?
03-10-2004, 11:55 AM
#1
Registered
Thread Starter
Does anyone know this engine?
Does anyone have any experience (good/bad/otherwise) with this engine? I guess they make a 525 HP as well for about $15K. Still waiting for them to send me information.
From Arizona Speed & Marine's website:
625 HP on 87 Octane!! VORTEC L-18 engine
**Headers are not included**
Engine Dynoed 625 HP and 675 ft/lbs Torque
Replicated intake port manifold desing incorporates cross ram tuning.
Large 85 MM billet throttle valve includes progressive action for smooth tip-in.
Low overall height, 1" taller than stock.
Re-designed cylinder heads have large stainless steel intake valves, inconel exhaust valves.
Hydraulic roller billet camshaft with full rollerized rocker arms.
high capacity oil pan, two piece design with windage tray.
Knock sensor, rev-limit, and temperature protection programmed in ECU.
MSD 8.5 MM spark plug wires.
Retail: $25,000.00Your Price: $21,900.00
damdonzi has attached this image:
From Arizona Speed & Marine's website:
625 HP on 87 Octane!! VORTEC L-18 engine
**Headers are not included**
Engine Dynoed 625 HP and 675 ft/lbs Torque
Replicated intake port manifold desing incorporates cross ram tuning.
Large 85 MM billet throttle valve includes progressive action for smooth tip-in.
Low overall height, 1" taller than stock.
Re-designed cylinder heads have large stainless steel intake valves, inconel exhaust valves.
Hydraulic roller billet camshaft with full rollerized rocker arms.
high capacity oil pan, two piece design with windage tray.
Knock sensor, rev-limit, and temperature protection programmed in ECU.
MSD 8.5 MM spark plug wires.
Retail: $25,000.00Your Price: $21,900.00
damdonzi has attached this image:
Thread
Thread Starter
Forum
Replies
Last Post
psmith
Chris Craft
3
04-17-2007 05:17 AM
Clay Washington
General Boating Discussion
101
01-16-2006 02:27 PM
JGB
General Q & A
40
02-16-2005 10:26 AM
timucin
General Q & A
11
09-23-2002 10:26 AM
