alpha lowers
 

OK heres the deal. i have an 85 chris scorpion with the original gen1 alphas on it. i hava a line on a lower that i am pretty sure is a late 90's or so alpha. will that late of a lower fit on my early drive. thanks guys :cool:

Only if its a Gen 1 lower. Can't put a Gen 2 lower on.

thanks MT . . thats what i needed to know. i dont have the benifit of being able to compare the two side by side before i buy. my boat has the original gen1's and the drive in question came off a late 90's donzi classic i believe. thanks.

Put a counter-rotation lower on the port side, if the boat rolls to the left it may stop it. Boat will handle better too, docking and under way.

i was thinking of doing that but was having trouble locating a gen1 lefty. boat seems to handle pretty well now but it would be nice have a counter rotator on it.

Have a good drive shop make one up. It may cost a bit though! BBB

BTW does anybody know the year they stoped making the gen1 alpha

so you can change just the lower and make the drive counter rotate???

thats correct twin. the counter rotation is in the lower. i think there is a few more minor things like cable orientation. but the lower itself handels left or right rotation :cool:

91 was end of gen1 in new boats.