Source for Stainless Fuel line?
05-04-2004, 02:22 PM
#1
Charter Member #655
Charter MemberThread Starter
Source for Stainless Fuel line?
anyone have one? dressing up the old hogs....
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
05-04-2004, 02:41 PM
#3
Registered
Every place I've checked is about 6.00 a foot for #8. Check at hydraulic supply stores. If you don't have one near you up there in the north woods, 
Jegs and Summit carry it for the same price.
Jegs and Summit carry it for the same price.
05-04-2004, 03:01 PM
#4
Registered
WE USE A HARD LINE THAT WE HAVE MANUFACTURED FOR OUR MARINE ENGINES WHICH HAVE THE CORRECT BENDS FOR PROPER FIT AND ARE SUPPLIED WITH ALL COMP FITTINGS FOR A GOOD TIGHT SEAL . THE FITTINGS ARE ALL HARD ANODIZED, THESE LINES ARE THE NICEST IVE SEEN ANYWHERE IF YOU'D LIKE GIVE ME CALL AND ILL GIVE YOU THE PRICE I JUST NEED TO KNOW IF SINGLE OR DUAL CARB AND IF DOMINATOR OR 4150 GOOD LUCK LAZ MESA 1-305-884-5368 WWW.MESABALANCING.COM
05-04-2004, 03:33 PM
#5
Charter Member #737
Charter Member
I bought some braided lines from a airplane parts store here in town and it was cheaper than the speed shops.
05-04-2004, 06:30 PM
#6
Charter Member #655
Charter MemberThread Starter
I'm hitting the hydraulic place here in town tomarrow.
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
05-04-2004, 06:50 PM
#7
Registered
Join Date: Sep 2003
Location: Toledo, Ohio/Las Vegas, NV
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
Any local Aeroquip dealers near you (Aeroquip Express)? Make sure you run big enough size line for your H.P. I would say no smaller that -10 to the fuel pump, -8 pump to carb.
Thread
Thread Starter
Forum
Replies
Last Post
jdub
General Boating Discussion
2
05-28-2007 06:21 AM
