502 mpi supercharger headgaskets
 

I have read alot of threads. Any suggestions on what gasket. 7lbs of boost. A part number would be great. Thanks

Re: 502 mpi supercharger headgaskets
 

I don't have any first hand experience with this. But, many on this board swear by cometic gaskets..

http://www.cometic.com/

Re: 502 mpi supercharger headgaskets
 

Cometic is what you want, don't have a part number but do a search on Cometic to help you with selection.

Re: 502 mpi supercharger headgaskets
 

I run Fel-Pro marine gskts. 3 seasons of 6 lbs boost no problems.

Re: 502 mpi supercharger headgaskets
 

Fel-Pro here also. 6 yrs @ 5lbs, trouble free

Re: 502 mpi supercharger headgaskets
 

FelPro marine 1047 is what I use. 6lbs
The Cometics are good also, but the felpro is easily available for me and works just fine. In fact, I'm going to pickup a set today, since I had a problem with over heating due to sucking up sand. I had a valve job done and all should be good.

Re: 502 mpi supercharger headgaskets
 

Thanks for all you opinions.

Re: 502 mpi supercharger headgaskets
 

Whatever gasket you run after initial start bring engine up to temp then let engine cool and retorque the h/gaskets. Even though you not supposed to have to do this it makes a difference. Been there done that!