Go Back  Offshoreonly.com > Technical > General Q & A
502 mpi supercharger headgaskets >

502 mpi supercharger headgaskets

Notices

502 mpi supercharger headgaskets

Thread Tools
 
Old 06-29-2004 | 06:38 PM
  #1  
blownboat
Guest
 
Posts: n/a
Default 502 mpi supercharger headgaskets

I have read alot of threads. Any suggestions on what gasket. 7lbs of boost. A part number would be great. Thanks
 
Reply
Old 06-29-2004 | 09:08 PM
  #2  
Vinny P's Avatar
I hate the winter!!
 
Joined: Jul 2001
Posts: 2,707
Likes: 0
From: long island, new york
Default Re: 502 mpi supercharger headgaskets

I don't have any first hand experience with this. But, many on this board swear by cometic gaskets..

http://www.cometic.com/
Vinny P is offline  
Reply
Old 06-29-2004 | 09:09 PM
  #3  
Registered
20 Year Member
 
Joined: Nov 2000
Posts: 1,418
Likes: 20
From: Westport, Kentucky
Default Re: 502 mpi supercharger headgaskets

Cometic is what you want, don't have a part number but do a search on Cometic to help you with selection.
BadDog is offline  
Reply
Old 06-29-2004 | 09:45 PM
  #4  
Smitty's Avatar
VIP Member
20 Year Member
Super Moderators
 
Joined: Apr 2001
Posts: 4,213
Likes: 0
From: Chicago il
Default Re: 502 mpi supercharger headgaskets

I run Fel-Pro marine gskts. 3 seasons of 6 lbs boost no problems.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Smitty is offline  
Reply
Old 06-29-2004 | 11:08 PM
  #5  
US1 Fountain's Avatar
Ginger or Mary Ann?
25 Year Member
Charter Member
 
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Default Re: 502 mpi supercharger headgaskets

Fel-Pro here also. 6 yrs @ 5lbs, trouble free
US1 Fountain is offline  
Reply
Old 06-30-2004 | 08:31 AM
  #6  
28Eliminator's Avatar
Registered
 
Joined: Dec 2001
Posts: 809
Likes: 0
From: Rapid City SD
Default Re: 502 mpi supercharger headgaskets

FelPro marine 1047 is what I use. 6lbs
The Cometics are good also, but the felpro is easily available for me and works just fine. In fact, I'm going to pickup a set today, since I had a problem with over heating due to sucking up sand. I had a valve job done and all should be good.
28Eliminator is offline  
Reply
Old 06-30-2004 | 11:34 AM
  #7  
blownboat
Guest
 
Posts: n/a
Default Re: 502 mpi supercharger headgaskets

Thanks for all you opinions.
 
Reply
Old 07-01-2004 | 08:28 AM
  #8  
Registered
 
Joined: Feb 2004
Posts: 3,710
Likes: 2
From: MT. JULIET, TN.
Default Re: 502 mpi supercharger headgaskets

Whatever gasket you run after initial start bring engine up to temp then let engine cool and retorque the h/gaskets. Even though you not supposed to have to do this it makes a difference. Been there done that!
kennyo is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cass236
General Q & A
2
07-21-2008 01:00 PM
brian valery
General Boating Discussion
1
05-17-2007 04:40 PM
tomcat
General Q & A
106
10-14-2004 10:52 AM
Steve_H
General Q & A
11
02-07-2004 05:57 PM
JEFF L
General Q & A
11
11-09-2002 09:44 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.