Offshoreonly.com - Greasing the drive coupler

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Greasing the drive coupler (https://www.offshoreonly.com/forums/general-q/82387-greasing-drive-coupler.html)

audacity

07-01-2004 09:32 AM

Re: Greasing the drive coupler

"2.Re-install drive and hit the zerk on the outside lower right of the gimble housing to get the gimble bearing. 1 Zerk. "....do this with out the drive installed....turn bearing by hand as you pump grease...wipe excess....grease shaft prior to install...forget greasing the coupler zirks

audacity

07-01-2004 09:33 AM

Re: Greasing the drive coupler

we have 2 jerks greasing!

All times are GMT -5. The time now is 02:57 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page