Go Back  Offshoreonly.com > Technical > General Q & A
Programmable ECU's for HP 500 EFI's? >

Programmable ECU's for HP 500 EFI's?

Notices

Programmable ECU's for HP 500 EFI's?

Thread Tools
 
Old 12-26-2001, 12:50 PM
  #11  
Registered
 
Join Date: Dec 2001
Location: CALIFORNIA
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Post

I'M ANOTHER 500 EFI OWNER WITH THE SAME PROBLEM. I CURED ABOUT 95% OF THE TRANSOM SOOTING PROBLEM WITH THE ADDTION OF MSD #6 BOXES AND EXTENDED TIP BOSCH PLATINUM PLUGS. THIS HOWEVER DID NOT CURE THE OIL DILUTION PROBLEM, BUT DID IMPROVE IT A LIITLE. MERC HAS MAPPING ON THESE ECU'S SET VERY RICH.

ANYONE HAD PERSONAL EXPERIANCE WITH CROCKETT ON REPROGRAMED ECU'S/ DID IT CURE OIL DILUTION PROBLEM? I'M CHANGING OIL @ 20 HOURS AND IT LOOKS BAD.
BOATAHOLIC is offline  
Old 12-26-2001, 10:13 PM
  #12  
Charter Member #601
Charter Member
 
Mr Gadgets's Avatar
 
Join Date: Dec 2000
Location: Holland, Mi USA.
Posts: 3,276
Received 5 Likes on 4 Posts
Post

Wow! That's kind of pathetic.. dump enough fuel in to dilute the oil just to play it safe.. Seems like a carb would be better in that case.
How about it, anyone having good luck with a reprogram?? Curious minds want to know!!

Dick
Mr Gadgets is offline  
Old 12-26-2001, 10:37 PM
  #13  
Charter Member
Charter Member
 
Thunderstruck's Avatar
 
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes on 0 Posts
Post

Is it possible to buy the software to reprogram your own ECM? That seems the way to go.
Thunderstruck is offline  
Old 12-26-2001, 11:05 PM
  #14  
Registered
 
Towel Boy's Avatar
 
Join Date: Oct 2001
Location: goodolusofA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Post

Hey, has anyone contacted mercruiser about this, they may reprogram your ecu's for nothing or replace them,call mercruiser at 405-245-8794, sorry no toll free #'s even for dealers a few months back or merc high perf 2 920-924-2088, good luck, Marc
Towel Boy is offline  
Old 12-27-2001, 08:11 AM
  #15  
Registered
Thread Starter
 
boathead's Avatar
 
Join Date: Feb 2001
Location: Big Rapids, MI
Posts: 346
Likes: 0
Received 0 Likes on 0 Posts
Post

Judging from the replies on this thread, it looks to me like everyone with the HP 500 EFI's should do oil analysis on a regular basis, I know I am! I think it may be time to contact Merc, this is not only hard on the engine, it's dangerous with that much fuel in the oil. I think I'm going to contact them ASAP! I'll post any results.
Paul
boathead is offline  
Old 12-27-2001, 09:42 AM
  #16  
Charter Member
Charter Member
 
fastedy's Avatar
 
Join Date: Oct 2000
Location: richmond virginia
Posts: 1,353
Likes: 0
Received 0 Likes on 0 Posts
Post

Where do you get the fuel tested? I have smelled fuel in my oil for a long time I do change it before every race (3 to 4 hours).

Eddie Simmons
Superboatusa.com
fastedy is offline  
Old 12-27-2001, 09:55 AM
  #17  
Registered
 
Join Date: Jan 2001
Location: PA and MD
Posts: 1,461
Received 2 Likes on 1 Post
Post

With the fuel diluting the oil issue- All the more reason to run synthetic oil. Fuel has NO lubricating properties. Save your engines. Use synthetic oil.
Everyone is blaming the ECU programming. Has any one (I'm sure Dustin and Crocket have) dynoed these motors and checked the A/F ratios and verified that they run rich? It would be nice to see a dyno sheet with rpm,hp,tq,A/F,bsfc.
Could this be a ring sealing problem and not ECU?
cobra marty is offline  
Old 12-27-2001, 10:40 AM
  #18  
Registered User
 
BAJA WILL's Avatar
 
Join Date: Feb 2001
Location: Tampa, Indian Shores Beach
Posts: 3,300
Likes: 0
Received 1 Like on 1 Post
Post

Just a a thought, My 2001 500efi, sooted really bad for first 50hrs, after that it reduced by around 80%. I am at 105hrs and soots very little and I have never reprogrammed a thing. I was told it is normal for them to soot, while breaking in.

BAJA WILL is offline  
Old 12-27-2001, 12:34 PM
  #19  
Registered
 
Whipple Charged's Avatar
 
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes on 4 Posts
Post

Cobra Marty,

We've dyno tested them, they're lean on the dyno under swept test and their usually around 12.2-12.5:1 in the boat.

Thanks,
Dustin
Whipple Charged is offline  
Old 12-28-2001, 06:55 AM
  #20  
Registered
Thread Starter
 
boathead's Avatar
 
Join Date: Feb 2001
Location: Big Rapids, MI
Posts: 346
Likes: 0
Received 0 Likes on 0 Posts
Post

Fastedy,
I use Oil Analyzers, they're part of Amsoil, : $12 a piece dealer cost.
PdMA is another source, they give you two free tests as an introductory deal!http://www.pdma.com/oil.html.
I think this is cheap insurance for boat engines, I would have never caught this problem if not for the oil analysis.
Paul
boathead is offline  


Quick Reply: Programmable ECU's for HP 500 EFI's?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.