500HP carb clone
 

Can someone tell me specifically what is in the 500HP carb motor?

I would like to build a similar engine.

Carb, Intake, Heads, Cam, Pistons, rods, crank?

I have a 454 Mag, would the heads or crank be the same as the 500hp?

Re: 500HP carb clone
 

Dave,
Here is the cam/valvetrain info:
http://www.cranecams.com/?show=brows...11&lvl=2&prt=5
Bob

Re: 500HP carb clone
 

Re: 500HP carb clone
 

I have a take off set of pistons, cam, intake, exhaust and roller rockers fronm a 500 hp let me know if you have interest

Re: 500HP carb clone
 

also the f00 hpo was a 502 block sorry I missed you wer building a 454

Re: 500HP carb clone
 

Thanks Guys,

Klaw, I'm not necessarily building a 454. I just wanted to know if the crank and heads were the same. I think I want to build a 502. My 454 block is 7 years old and was run in salt a lot.

Re: 500HP carb clone
 

Dave M
If your 454 crank is a Gen V or VI, it is the same casting as the 502 but is balanced differently for the 502's larger pistons.
Your machinist can balance your old 454 rotating assembly for the 502. :)

Re: 500HP carb clone
 

Dave M,
I am cosidering an upgade on my gen VI 1998 HP 500's. I will be selling 2 complete sets of cylinder heads and cams this fall. These are fresh water parts with approx. 200 hours on them. P.M. me if interested. Jeff

Re: 500HP carb clone
 

Dave,

This is Ty with the 25 Aggressor. We met at Fairview Beach last year. I have a complete and balanced 502 rotating assembly. Let me know if you are interested. It is down in Richmond at the engine builder.