OMC 460 Cobra exhaust risers
#1
Registered
Thread Starter
Join Date: Jul 2003
Location: hawaii
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
OMC 460 Cobra exhaust risers
Any suggestions on where to find stock risers? It seems nobody makes replacements (aftermarket) and there is a "national" backorder until Dec. from Bombardier. These are for a Donzi 33.
#2
Toxic FORMULA
Platinum Member
Re: OMC 460 Cobra exhaust risers
Depends on how desperate you are , but I had a 460 KC and used Imco Powerflows for a BBC with adapter plates that were also made by Imco.
If you compare a BBF and BBC exhaust gaskets you'll find the centerline on the ports are almost identical. The adapter reshapes the ports and relocates the bolt holes. It's even tapered at the top to cause the riser to tilt inward to it's original location
If you compare a BBF and BBC exhaust gaskets you'll find the centerline on the ports are almost identical. The adapter reshapes the ports and relocates the bolt holes. It's even tapered at the top to cause the riser to tilt inward to it's original location
Thread
Thread Starter
Forum
Replies
Last Post
BAJA WILL
General Boating Discussion
19
07-19-2007 02:49 PM
MidnightRider
General Boating Discussion
3
04-11-2007 02:56 PM