Gil Manifolds
#4
Charter Member #927
Charter Member
Re: Gil Manifolds
Originally Posted by sutphen30
have them on my 454's.
#6
Registered
Thread Starter
Join Date: Oct 2000
Location: Fells Point MD
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gil Manifolds
Hey Michael, how has your summer been? I can't believe the summer is gone. I only made it up you way once this summer and that was a last minute decision last weekend. Flat as a pancake. The boat is running well, I have been dialing it in after the winter work. I needed to rejet the carb on the primary side and it really helped on the bottom end and mid range. I still need to get some plug readings on the seconderies to see if they are jetted right. The dyno only goes so far.
I am just selling some parts that are sitting in my basement. I don't need two sets of Gil exhausts as spares.
I broke a hydraulic cylinder on the tab the second time I used it. I need to remove some of the steering plumbing to get to it so it is fixed in the up position and has become a very pretty porta potty for this summer. The switch however worked like a charm both times. LOL
How is your boat running?
Take care
Shawn
I am just selling some parts that are sitting in my basement. I don't need two sets of Gil exhausts as spares.
I broke a hydraulic cylinder on the tab the second time I used it. I need to remove some of the steering plumbing to get to it so it is fixed in the up position and has become a very pretty porta potty for this summer. The switch however worked like a charm both times. LOL
How is your boat running?
Take care
Shawn
#7
Registered
Join Date: Dec 2002
Location: chesapeake bay md
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gil Manifolds
Shawn my boat is running well but I have only been out 4 times. Mom got sick in early augest and passed away the 20th. So the whole month was a blurr to me. I was hoping for some decent weather in sept. but so far... Maybe there are still some nice days left? Are you going to the cambridge race?
Michael
Michael
#8
Registered
Join Date: Aug 2003
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Thread Starter
Join Date: Oct 2000
Location: Fells Point MD
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gil Manifolds
Michael, I am sorry to hear about your mom. Hope things are getting better.
I do plan on going to the race in Cambridge and looking forward to it. Will you be there too? I read they will close access to the race as early as 10AM, so I am planning on getting there by then and just anchoring up and hopefully enjoy the day.
I do plan on going to the race in Cambridge and looking forward to it. Will you be there too? I read they will close access to the race as early as 10AM, so I am planning on getting there by then and just anchoring up and hopefully enjoy the day.
#10
Registered
Join Date: Mar 2004
Location: Washington State
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gil Manifolds
I may be interested in a set as well. Please send pics and info to [email protected]
Thanks
Thanks