Bandit 800 SC's???
#1
Geronimo36
Gold Member
Thread Starter
Bandit 800 SC's???
I'm currently looking at a boat with Kurt's Marine, Bandit 800 SC's. I've tried contacting them a couple times the last few days to find out how the motors are set up, but they are getting ready for the race this weekend and couldn't get back to me.
Anyway, my first choice is to removeg the blowers and run them natrually aspirated, second lower the boost to 2-3 lbs so I can run 650 hp or so depending on how the motors are set up.
I am wondering if anyone can tell me what compression ratio Kurt run's in his 800SC package?
I am affraid that if the comp. ratio is below 8.5:1 I won't be able to make any power without the blower. The long block is 572 cu. in.
Anyone know the answer?
Thanks in Advance!
Panther
Anyway, my first choice is to removeg the blowers and run them natrually aspirated, second lower the boost to 2-3 lbs so I can run 650 hp or so depending on how the motors are set up.
I am wondering if anyone can tell me what compression ratio Kurt run's in his 800SC package?
I am affraid that if the comp. ratio is below 8.5:1 I won't be able to make any power without the blower. The long block is 572 cu. in.
Anyone know the answer?
Thanks in Advance!
Panther
Last edited by Panther; 09-22-2004 at 06:49 PM.