Offshoreonly.com - Blue Printing Dominators- WHO??

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Blue Printing Dominators- WHO?? (https://www.offshoreonly.com/forums/general-q/88985-blue-printing-dominators-who.html)

blown formula

10-19-2004 08:18 PM

Blue Printing Dominators- WHO??

I need to blueprint my Dominators and add screw-in idle air bleeds. Who is the best "bargain" to do this??? I used Nickerson for my Procharger 4150, but who does Dominators??

aero-offshore

10-20-2004 11:06 AM

Re: Blue Printing Dominators- WHO??

WWW.pro-system.com Top notch, extremely knowledgeable

RLW	10-20-2004 05:46 PM

Re: Blue Printing Dominators- WHO??

Nickerson did two different 1050's for me.
One blown and one N/A.

Nickerson Performance
215-781-1370

Vinny P

10-20-2004 06:22 PM

Re: Blue Printing Dominators- WHO??

I just ordered a 1050 Dominator from Nickerson for my 540 I am building.

dykstra

10-20-2004 06:56 PM

Re: Blue Printing Dominators- WHO??

nickerson

aero-offshore

10-21-2004 08:26 AM

Re: Blue Printing Dominators- WHO??

Quote:

Originally Posted by blown formula

I need to blueprint my Dominators and add screw-in idle air bleeds. Who is the best "bargain" to do this??? I used Nickerson for my Procharger 4150, but who does Dominators??

Nickerson is defiantly a very good carb shop, but I believe Pro-systems does an every bit as good job. They dialed in my 1050 for my blower app. They even had the idle set right. Jetted, air bleeds, anodized reworked venturi es, blueprinted, pumps and benched flowed for around 400.00 :D

Dixie Doug

10-21-2004 10:57 AM

Re: Blue Printing Dominators- WHO??

Mike Ross Racing Carbs 636-240-1854

blown formula

10-21-2004 12:37 PM

Re: Blue Printing Dominators- WHO??

I'll look into pro-systems. I like Nickerson also but I found
Chuck Nuytten in Rockwall Tx (outside Dallas) & has done a lot of Race boats & championship drag cars..... even makes billet blocks in his shop.
Thanks for all the suggestions. I appreciate it. :drink:

All times are GMT -5. The time now is 02:43 AM.