Blue Printing Dominators- WHO??
#1
Registered
Thread Starter
Blue Printing Dominators- WHO??
I need to blueprint my Dominators and add screw-in idle air bleeds. Who is the best "bargain" to do this??? I used Nickerson for my Procharger 4150, but who does Dominators??
Last edited by blown formula; 10-19-2004 at 08:19 PM. Reason: add subscription
#2
Registered
Join Date: Apr 2001
Location: muskegon, michigan
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blue Printing Dominators- WHO??
WWW.pro-system.com Top notch, extremely knowledgeable
Last edited by aero-offshore; 10-20-2004 at 11:08 AM.
#6
Registered
Join Date: Apr 2001
Location: muskegon, michigan
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blue Printing Dominators- WHO??
Originally Posted by blown formula
I need to blueprint my Dominators and add screw-in idle air bleeds. Who is the best "bargain" to do this??? I used Nickerson for my Procharger 4150, but who does Dominators??
#8
Registered
Thread Starter
Re: Blue Printing Dominators- WHO??
I'll look into pro-systems. I like Nickerson also but I found
Chuck Nuytten in Rockwall Tx (outside Dallas) & has done a lot of Race boats & championship drag cars..... even makes billet blocks in his shop.
Thanks for all the suggestions. I appreciate it.
Chuck Nuytten in Rockwall Tx (outside Dallas) & has done a lot of Race boats & championship drag cars..... even makes billet blocks in his shop.
Thanks for all the suggestions. I appreciate it.