|
Re: Hustler 500efi engine tear down & Build Up
Here is my post on spinning the Whipples.They sure make a lot of boost early in the rpm band :D
Videos http://www.offshoreonly.com/forums/s...hlight=whipple Rob :drink: |
Re: Hustler 500efi engine tear down & Build Up
3 Attachment(s)
Road trip. It doesent look like 1809 TQ does it ? :eek:
|
Re: Hustler 500efi engine tear down & Build Up
2 Attachment(s)
Ballance cards
|
Re: Hustler 500efi engine tear down & Build Up
2 Attachment(s)
Machine shop bill
|
Re: Hustler 500efi engine tear down & Build Up
1 Attachment(s)
cam card :D
|
Re: Hustler 500efi engine tear down & Build Up
2 Attachment(s)
Head flow is so/so. One set was a little better
|
Re: Hustler 500efi engine tear down & Build Up
2 Attachment(s)
#2
|
Re: Hustler 500efi engine tear down & Build Up
Which and what was don to your heads again? At .5-.6 lift there is In-300-345 and Ex-200. I think AFR and ported others will do almost 400In/300Ex at the same lift.
|
Re: Hustler 500efi engine tear down & Build Up
Originally Posted by cobra marty
Which and what was don to your heads again? At .5-.6 lift there is In-300-345 and Ex-200. I think AFR and ported others will do almost 400In/300Ex at the same lift.
|
Re: Hustler 500efi engine tear down & Build Up
How can you sleep at night knowing the MSD wires are hanging on the back of the engine? I would pull both motors and start over!
JK!! They look great. |
| All times are GMT -5. The time now is 09:33 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.