|
Re: Hustler 500efi engine tear down & Build Up
Originally Posted by Linster
How can you sleep at night knowing the MSD wires are hanging on the back of the engine? I would pull both motors and start over!
JK!! They look great. I just got some smaller pullys for the blower. Rob :drink: |
Re: Hustler 500efi engine tear down & Build Up
Originally Posted by Strip Poker 388
Thanks Linnie .I know I am going to shorten them they must be 5 foot long.theres a bunch of wires back there :( I am going to change the plug wires also,there 4 years old.Thinking about some valve covers too.
I just got some smaller pullys for the blower. Rob :drink: |
Re: Hustler 500efi engine tear down & Build Up
Originally Posted by Linster
Let us know how the extra power helps. 105?
Yep :drink: http://x7.putfile.com/2/4517130215-thumb.jpg http://img132.imageshack.us/img132/4...4medium4jr.jpg |
Re: Hustler 500efi engine tear down & Build Up
1 Attachment(s)
leek down before tear down #2
|
Bill there JE 30 over pistons,cr is around 8.6 8.7
Rob:drink: |
everything go good wed....
|
1 Attachment(s)
Originally Posted by open72
(Post 2075706)
everything go good wed....
Good , they made a little more power, |
1 Attachment(s)
Dyno sheet
|
I found my old dyno step test video
http://px2.sfstatic.com/handlers/Get...d=183711&w=120Hustler Whipple blower dyno step test,7psi |
Why wasnt the block painted blue instead of black when you got it back?
|
| All times are GMT -5. The time now is 09:33 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.