Go Back  Offshoreonly.com > Technical > General Q & A
Aluminum and Salt Water >

Aluminum and Salt Water

Notices

Aluminum and Salt Water

Old 12-12-2004, 06:30 AM
  #1  
Registered
Thread Starter
 
Join Date: Aug 2004
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default Aluminum and Salt Water

How long do Aluminum Exhaust Manifolds last in salt water. Also the same question for heads and intakes. Do brands make a big difference. I was told cast iron manifolds will live longer? I have a long history with outboards and have not seen many cast iron ones?
The help is appreciated.

Thanks For The Help,

Daddio
Daddio is offline  
Old 12-12-2004, 08:29 AM
  #2  
Charter Member #232
Charter Member
 
Audiofn's Avatar
 
Join Date: Oct 2000
Location: Carlisle, MA USA
Posts: 18,422
Received 6 Likes on 4 Posts
Default Re: Aluminum and Salt Water

If you have a long history with outboards then you know that they are all alluminum. How long do they last There is a diference btwn outboards and IO's The water tends to stay in the manifolds and motor so a good flushing after each use is required. Also there are some products that you can coat the heads and intake water passages with. You have to check but manifolds like Stainless marine coat the inside of their manifolds.

Jon
__________________
Put your best foot forward!
Audiofn is offline  
Old 12-12-2004, 08:38 AM
  #3  
Banned
 
cuda's Avatar
 
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Aluminum and Salt Water

Flushing is the key. I know a guy that ran aluminum heads in salt for seven years, took them off and resold them.
cuda is offline  
Old 12-12-2004, 09:16 AM
  #4  
Registered
VIP Member
 
Join Date: Jan 2004
Location: Boca Raton, FL
Posts: 3,682
Likes: 0
Received 4 Likes on 4 Posts
Default Re: Aluminum and Salt Water

Outboards are designed to drain when you shut them off, so salt water doesn't sit in them like a I/O motor.
Cuda's right about the flushing.
Edward R. Cozzi is offline  
Old 12-12-2004, 09:18 AM
  #5  
Registered
 
berns29scarab's Avatar
 
Join Date: Jul 2004
Location: Toms River, NJ
Posts: 7,141
Received 10 Likes on 7 Posts
Default Re: Aluminum and Salt Water

although flushing is key, a friend of mine flushes after every use, boats in Barnegat Bay, and cant get more than 2-3 seasons out of a set of heads.
berns29scarab is offline  
Old 12-12-2004, 09:49 AM
  #6  
Platinum Member
Platinum Member
 
mcollinstn's Avatar
 
Join Date: Sep 2001
Location: tn
Posts: 5,752
Received 133 Likes on 82 Posts
Default Re: Aluminum and Salt Water

I've heard the small cruiser guys (who don't flush) running gas in salt plan on new exhaust elbows every season, and entire manifolds every two.
mcollinstn is offline  
Old 12-12-2004, 02:26 PM
  #7  
Charter Member
Charter Member
iTrader: (1)
 
Ted G's Avatar
 
Join Date: Jan 2001
Location: Edgerock Baby!!
Posts: 7,663
Likes: 0
Received 1 Like on 1 Post
Default Re: Aluminum and Salt Water

We flush with soapy water after every run and the aluminum parts look good after 3 seasons-brackish water.
__________________
Chesapeake Bay Powerboat Association
www.cbpba.com
Ted G is offline  
Old 12-12-2004, 09:16 PM
  #8  
Registered
iTrader: (1)
 
offthefront's Avatar
 
Join Date: Feb 2004
Location: Northeast,Fla
Posts: 4,909
Received 9 Likes on 8 Posts
Default Re: Aluminum and Salt Water

Originally Posted by insptech
We flush with soapy water after every run and the aluminum parts look good after 3 seasons-brackish water.
can you elaborate on flushing with soapy water ?
offthefront is offline  
Old 12-12-2004, 09:46 PM
  #9  
Banned
 
cuda's Avatar
 
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Aluminum and Salt Water

I do the same thing. I'll squirt some liquid dish soap into the hose before flushing, then hook it up. I don't know if it helps or not, but it makes me feel better.

I can also tell when the motor is completely flushed when the suds quit coming out.
cuda is offline  
Old 12-12-2004, 10:02 PM
  #10  
daboatman1
Guest
 
Posts: n/a
Default Re: Aluminum and Salt Water

Has anyone tried anodize or some other coating? I see that the edelbrock alum heads come with a anodize coating to help with the harsh environment. Sounds good but how effective???
 

Quick Reply: Aluminum and Salt Water


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.