Russ,

Is this the guy north of 1171 on Shiloh out at the western edge of FM? North of Christina's? Actualy the road changes names but the name slips my mind with now.

BTW, how's the boat running??

The boat runs fine except that I can only get to the mid sixties with a labed mirage plus 23p. The boat is a 96 Scarab 29 with a single 502 mpi. My problem is that I cant seem to get the bow up like I'd like. Could be the fact that I'm running 6 optima gel batteries and a 2000 watt stereo system. Four of the batteries are mounted in the storage bin in my cabin area. I was really looking at my options to pick up some speed. I think I'm going to go with a set of headers and a whipple charger. I'll also rebuild the motor as well. I have those resources at work, but I don't know didley about fiberglass.

A guy in the fountain threads did it and shows pics, very informative, you might want to do a search there.......

Searay Jim,

I don't know exactly where he is located. I only talked to him on the phone. According to Casey at the Baja/Fountain dealer ship he has done all there work and some other race boats. He said it would cost about 2 grand to for my 25' boat. Still thinking about haveing him do it.

The boat is was running pretty good. Got 69MPH gps after I had the prop labbed. Gained 3 mph not to bad. I still need to go down to Bobs this sping and fine tune it the motor some. How's your motor comming along?

Russ

I'll bet that's him. I've heard a lot of good things about his gel and glass work. I ran by there a week or so ago and he was filled up! He always has at least 1 big go fast of some sort. As I drive by there was a Fountain being pulled in.

The motor is coming along. Should be ready and in the boat sometime after the holidays. I have to admit, I'm getting a little giddy!

i would check with Jerry Davis of Conroe fiberglass, the owner of War Party the "drag boat"

How about someone to blueprint in the FT. MEYERS FLA area 26' SCARAB W/ ARNESON # 6 LG S/B thanks obads 31

http://www.offshoreonly.com/forums/s...ad.php?t=64578

good pics, ideas ect, ect

Anyone know who blueprints in FT> MEYERS area 26 SCRAB arneson #6 LG S/B Thanks obads 31

Any suggestions on HULL Blueprinting IN s w fLA FT MEYERS area ??? Thanks obads 31 26' scarab