So what is the limit of #6 drive?
12-17-2004 | 10:05 AM
#12
Registered
Joined: Nov 2002
Posts: 3,029
Likes: 2
From: Bonita Springs, Florida
Re: So what is the limit of #6 drive?
#6's are north of 25g's and most dealers are north of 30 g's.
Mercruiser dealers can order them.
Any drive can be replaced by any other drive if the rigging is performed properly. Rigging may require the X dimension to be changed, positon of the engine in height and also maybe set forward or back. The transom holes may have be made larger or worst case scenerio, the transom plate may have to be completely filled in and recut.
Lots of work but very feasible.
Mercruiser dealers can order them.
Any drive can be replaced by any other drive if the rigging is performed properly. Rigging may require the X dimension to be changed, positon of the engine in height and also maybe set forward or back. The transom holes may have be made larger or worst case scenerio, the transom plate may have to be completely filled in and recut.
Lots of work but very feasible.
12-17-2004 | 10:08 AM
#13
Registered
Joined: Nov 2002
Posts: 3,029
Likes: 2
From: Bonita Springs, Florida
Re: So what is the limit of #6 drive?
Originally Posted by ratman
expresscat, worked for gm for years. seen any fast boats with ford or mopar power lately? nuff said. ratman
Thread
Thread Starter
Forum
Replies
Last Post
Fast Shafts
General Racing Discussion
20
11-02-2002 08:12 AM
