Offshoreonly.com - Porting and Polishing heads

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Porting and Polishing heads (https://www.offshoreonly.com/forums/general-q/94597-porting-polishing-heads.html)

barron

01-16-2005 02:12 PM

Porting and Polishing heads

What type of H.P. gain s can you expect and at what cost?

Raylar

01-16-2005 03:01 PM

Re: Porting and Polishing heads

You need to be more specific as to what particular head and what specification on the motor. This is a job that should be left to the expert cylinder head shops and I know there are some good ones right here on OSO who have more knowledge than you need. You would not fill your own cavities or do your own surgery! Be wise, use an expert.
Ray @ Raylar

All times are GMT -5. The time now is 09:23 AM.