Listen to this blown 383 small block
01-19-2005 | 09:16 AM
#11
Registered
Joined: Mar 2004
Posts: 2,696
Likes: 93
From: Pa
Re: Listen to this blown 383 small block
Originally Posted by MESABALANCING
Strip the heads are Brodix -11s and it actually is a two groove pulley but we didn't have the alternator or bracket back from the cnc shop were running the new MSD billet alt. I pulled it from 3000 to 5600 on the initial pull since I didn't know how the 750s were going to react its got a mechanical fuel pump and I didn't want to lean it out after I saw it was all good I turned it up to 6500 starting at 3000 again the cam is a custom from Cam Motion and its 275 272 @ .050 and .720 .690 lift solid roller. on a 112 lsa.
01-19-2005 | 10:32 AM
#12
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Re: Listen to this blown 383 small block
Originally Posted by MESABALANCING
Strip the heads are Brodix -11s and it actually is a two groove pulley but we didn't have the alternator or bracket back from the cnc shop were running the new MSD billet alt. I pulled it from 3000 to 5600 on the initial pull since I didn't know how the 750s were going to react its got a mechanical fuel pump and I didn't want to lean it out after I saw it was all good I turned it up to 6500 starting at 3000 again the cam is a custom from Cam Motion and its 275 272 @ .050 and .720 .690 lift solid roller. on a 112 lsa.
I like the New MSD alts. they look cool. If thats all the timing it needed pretty efficient combustion chamber
. I am seeing a lot of people using the Cam Motion cam now . When we use to do the street car shoot outs alot of them where running there cams. The carbs a 4779 750?. Laz do ya think the hp series would of made much diff at that CI?Was 6500 peek hp?That would be a nice morot for my Chevelle street car, Pump gas Laz You can host the video on this site for free http://rapidshare.de/en/main.html
rmbuilder your saying the bigger the spread on TQ and HP is better for a boat ???
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
01-19-2005 | 12:35 PM
#13
Thread Starter
Registered
Joined: Mar 2004
Posts: 729
Likes: 12
From: Miami, FL
Re: Listen to this blown 383 small block
Originally Posted by Strip Poker 388
I like the New MSD alts. they look cool. If thats all the timing it needed pretty efficient combustion chamber . I am seeing a lot of people using the Cam Motion cam now . When we use to do the street car shoot outs alot of them where running there cams. The carbs a 4779 750?. Laz do ya think the hp series would of made much diff at that CI?Was 6500 peek hp?That would be a nice morot for my Chevelle street car, Pump gas
Laz You can host the video on this site for free http://rapidshare.de/en/main.html
rmbuilder your saying the bigger the spread on TQ and HP is better for a boat ???
. I am seeing a lot of people using the Cam Motion cam now . When we use to do the street car shoot outs alot of them where running there cams. The carbs a 4779 750?. Laz do ya think the hp series would of made much diff at that CI?Was 6500 peek hp?That would be a nice morot for my Chevelle street car, Pump gas Laz You can host the video on this site for free http://rapidshare.de/en/main.html
rmbuilder your saying the bigger the spread on TQ and HP is better for a boat ???
01-19-2005 | 12:46 PM
#14
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Re: Listen to this blown 383 small block
Originally Posted by MESABALANCING
Strip I would have prefered the hp series but Tommy had already purchased these and as far as the peak power Tommy came in this morning and told me to turn it 7200RPM and it made 749HP I don't want to turn it higher because it doesn't have an adequate pan for that.Sincerely Laz Mesa
Buzz that thing atleast once to see peek.
They sound good over 7000 on the dynoes!!Makes ya not want to stand beside it 
Congrats on the motor that some good #'s . We where at Oddy's shop once they where Dynoing a small block Ford to 8900rpm that will make ya crenge . I think it was the Stanton bros street car shoot out motor, They where just setting the fuel curves only that day.
Laz Rip on it
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
01-19-2005 | 01:19 PM
#15
Registered
Joined: Mar 2004
Posts: 2,696
Likes: 93
From: Pa
Re: Listen to this blown 383 small block
Originally Posted by MESABALANCING
Strip the heads are Brodix -11s and it actually is a two groove pulley but we didn't have the alternator or bracket back from the cnc shop were running the new MSD billet alt. I pulled it from 3000 to 5600 on the initial pull since I didn't know how the 750s were going to react its got a mechanical fuel pump and I didn't want to lean it out after I saw it was all good I turned it up to 6500 starting at 3000 again the cam is a custom from Cam Motion and its 275 272 @ .050 and .720 .690 lift solid roller. on a 112 lsa.
Bob, is this another one of those "Race Only" cams you were talking about?
01-20-2005 | 07:51 AM
#17
MarineKinetics
Joined: Oct 2002
Posts: 942
Likes: 5
From: Rochester, NY
Re: Listen to this blown 383 small block
