|
Re: Parts Needed
So that bushing replaces the other one totally. Do ya have to press out the old one out ? I guess the cone goes on top of the bushing then the fiber washer? the washer looks to small for the bolt, may the the angle of the pick.
I figure the spring washer goes flat after your torque the bolt anyway. and they wanted some movement :eek: there with the engine alignment ? Thanks Rob :D |
Re: Parts Needed
Also looks like the new kit does not need the spacer part #23-99299 for the bolts.
Thanks Marc |
Re: Parts Needed
The fiber washer goes between the inner plate and the flywheel housing. The only purpose I can figure is to prevent metal to metal contact, possibly with enough engine torque, or the bushing slips out of postion, or fails.
|
Re: Parts Needed
Originally Posted by Mbam
There is a replacment kit, elimimates the use of the old spring washers, you need 1 kit per engine. Part number is 865329A02, we sell them online for $29.53 per kit (and have them on the shelf).
Marc, I see they have eliminated the spring but does the small stainless washer go in its place? Kurt |
| All times are GMT -5. The time now is 09:31 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.