Picture of IMCO Lowered Alt & P/S Bracket?
02-03-2005 | 11:16 PM
#1
Thread Starter
Emerald Coast of Florida
Joined: May 2004
Posts: 623
Likes: 0
From: Navarre FL
Picture of IMCO Lowered Alt & P/S Bracket?
I bought the Imco bracket (PSA-111), but am wondering on the setup of the Alt, merc water pump, and PS tension/support brackets. Any body with a picture of it installed, I would appreciate it.
Thanks
Thanks
Last edited by VelocityDriver; 02-04-2005 at 04:15 PM.
02-05-2005 | 08:49 AM
#3
Registered
Joined: Aug 2003
Posts: 186
Likes: 1
From: NEW YORK
Re: Picture of IMCO Lowered Alt & P/S Bracket?
I have it on my engines but they are apart for freshenup. what do you need to know? I made my own bracket for sea pump to alt tension, not too hard. When you are done you will have nice short belts. Before it would throw the p/s belt at high rpm, (too long of a belt when using crossovers).
02-05-2005 | 02:19 PM
#4
Official OSO boat whore
Joined: Oct 2000
Posts: 6,157
Likes: 0
From: Mequon, WI
Re: Picture of IMCO Lowered Alt & P/S Bracket?
There was actually a thread on this very thing only a couple of weeks ago in the tech section. You might just find your answer in there. I don't think there was a pic of the assembly though.
02-05-2005 | 03:54 PM
#5
~~~~
Joined: Oct 2000
Posts: 1,451
Likes: 3
From: Western New York
Re: Picture of IMCO Lowered Alt & P/S Bracket?
02-05-2005 | 04:01 PM
#6
~~~~
Joined: Oct 2000
Posts: 1,451
Likes: 3
From: Western New York
Re: Picture of IMCO Lowered Alt & P/S Bracket?
Thread
Thread Starter
Forum
Replies
Last Post
blue64drop
General Q & A
15
10-26-2002 09:31 AM
