496 MAG H.O. Torque

Reply Subscribe

Thread Tools

02-09-2005 | 10:06 AM

kfm237

Thread Starter

Registered

Joined: Nov 2004

Posts: 28

Likes: 0

496 MAG H.O. Torque

What is the torque of some of the stock Merc motors like the 496 MAG HO, 502Mag, HP500, Hp525?. It seems like only the horsepower numbers are listed for a given motor.

02-09-2005 | 11:45 AM

madbouyz

Joined: Nov 2002

Posts: 1,027

Likes: 138

From: PortRoyal Bermuda

Re: 496 MAG H.O. Torque

I don't have my spec sheet here with me but I'm pretty sure the 502 mpi Mag is 519 ftlb @ 2900 rpm ...

02-09-2005 | 11:50 AM

CigDaze

Platinum Member

Joined: Jun 2001

Posts: 21,346

Likes: 10

Re: 496 MAG H.O. Torque

496ho

Attached Thumbnails

02-09-2005 | 06:46 PM

Harper220

Registered

Joined: Jun 2003

Posts: 1,496

Likes: 1

From: Omaha~LOTO

Re: 496 MAG H.O. Torque

Quote:

Originally Posted by CigDaze

496ho

That doesn't seem right... 505 peak at 4000 rpm... I'll check around.

02-10-2005 | 12:31 AM

Raylar

Registered

Joined: Jan 2004

Posts: 2,777

Likes: 12

From: San Diego, California

Re: 496 MAG H.O. Torque

Our extensive dyno tests show that a 496HO will produce about 495ft/lbs torque at about 3600 rpm peak. Our new kit on a 496HO produces about 610ft/lbs torque at about 3800 rpms. this is way more than any other motor you listed.
Regards,
Ray @ Raylar

02-10-2005 | 04:56 AM

cobra marty

Registered

Joined: Jan 2001

Posts: 1,461

Likes: 3

From: PA and MD

Re: 496 MAG H.O. Torque

Raylar, Do you have dyno curves for stock and your upgraded motor?

02-11-2005 | 12:22 AM

Raylar

Registered

Joined: Jan 2004

Posts: 2,777

Likes: 12

From: San Diego, California

Re: 496 MAG H.O. Torque

Marty:
Yes I have dyno sheets for both stock 496 HO, 496 mag and our 496 HOR. E-mail me at [email protected] and I will see that you get a copy via e-mail.
Raylar