timing cover
do any of you know of any 2 or 3 pcs cover other than comp cam that would fit a gen vi at a reasonable price?
been looking on the internet without luck. and what would be a good adjustable single roller chain set for a gen vi ? |
Re: timing cover
someone must use 2 or 3 pcs timing set cover(gen vi) other than the one made by comp cam?
|
Re: timing cover
I had the same problem trying to find covers for a Gen 5. Nobody makes them. As far as I know, Comp is the only one making multi piece covers for Gen 6.
|
Re: timing cover
did you consider the Milodon gear drive, it has a 2 pc cover.
|
Re: timing cover
no i haven't.
is there advantage to go gear drive? someome told me they were very noise,true? |
Re: timing cover
I've run them on mark 4 and gen 5 motors, they are very accurate as far as the timing, they don't jump around like a chain, and they last forever. The Milodon has one gear on a shaft, mounted to the housing,that fits between the cam gear and the crank gear. I doubt you would ever hear it in a boat.
|
Re: timing cover
If you going this route you would be better off just to go with the Jesel belt drive.
Chris |
Re: timing cover
how long does the belt last in a marine application ?
|
Re: timing cover
Gear drives rob HP and cause unwanted valvetrain harmonics. Timing chain or belt drive.
|
Re: timing cover
thank's for the inputs guys.
i noticed would need a three pcs cover because can't pull the balancer in place and budjet does not permit gears or belt system at this point,so will stick with stock cover for now. appreciate all your inputs.JP. |
All times are GMT -5. The time now is 10:19 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.