Can 280 K plane be straightened?
03-29-2005, 01:09 PM
#1
Registered
Thread Starter
Join Date: Jun 2001
Location: Quincy, IL
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Can 280 K plane be straightened?
I have a port side 280 K plane that is not perfectly flat. I parting out a wrecked boat and looks like this tab may have took a hit and bent it ever so slightly. I may notice a slight bend in the tab cylinder. Can these be purchased separately or fixed?
03-29-2005, 01:54 PM
#3
Registered
Re: Can 280 K plane be straightened?
You can buy the parts separately, but they cost big $$$$
I would look for used parts or this will cost you too much to salvage. I wouldn't be surprised if one new plate was $500 I can't guess at the cylinder.
I would look for used parts or this will cost you too much to salvage. I wouldn't be surprised if one new plate was $500 I can't guess at the cylinder.
VIP Member
03-30-2005, 11:13 AM
#5
Registered
Join Date: Dec 2003
Location: Ottawa, Ontario,Canada baby!
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can 280 K plane be straightened?
Take the cylinder off and go to a hydraulic shop. If its just the rod thats bent, they can replace and repack! I had a local shop replace the packings on one of mine last summer. Cheap!
03-31-2005, 09:49 PM
#6
Registered
Thread Starter
Join Date: Jun 2001
Location: Quincy, IL
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can 280 K plane be straightened?
Hey Strip Poker...call me when you do...217-242-2561 or email me at [email protected]
04-01-2005, 07:07 AM
#9
Registered
Join Date: Sep 2002
Location: Brussels, Ont. CAN. Landlocked between Lake Huron, Ontario and Erie
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can 280 K plane be straightened?
That must've been a 'slight' bend. Usually, a cast aluminum tab (or virtually anything cast aluminum) has a small window read: tolerance to deflection, and just snaps. 
It's great that you've found other options for the plates and Fred could definitely set you up with a pair of nice stainless cyls. They are much nicer looking than the stock issue in my opinion
It's great that you've found other options for the plates and Fred could definitely set you up with a pair of nice stainless cyls. They are much nicer looking than the stock issue in my opinion
04-14-2005, 08:28 AM
#10
Registered
Thread Starter
Join Date: Jun 2001
Location: Quincy, IL
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can 280 K plane be straightened?
Hey Sutphen30...I got your plates...need to send check. I want to verify name and address. Email it to me at [email protected]
Thanks
Thanks
