Frank Beck motor?
#1
Registered
Thread Starter
Join Date: Apr 2006
Location: Grand Lake (E-Dock Junior Varsity)
Posts: 3,017
Likes: 0
Received 2 Likes
on
2 Posts
Frank Beck motor?
Anyone ever heard of him? Lookin at a boat that has a Frank Beck motor in it.. Would sure like to not have to have the motor yanked and gone through by brad before I could enjoy it.. supposedly an Oklahoma motor?
"Frank Beck high performance 540 cu in BDS 8-71 blower motor producing 870hp at 6.8 lbs of boost. 2 850 cfm Barry Grant dual feed Carbs above a super chiller, Dart Pro 1 Alum heads, high capacity oil cooler Diamond plate flooring in engine compartment. Runs on pump gas. All performance internal components from Jesel to the High performance ignition system from MSD to the CMI large tube, polished SS Exhaust system "
"Frank Beck high performance 540 cu in BDS 8-71 blower motor producing 870hp at 6.8 lbs of boost. 2 850 cfm Barry Grant dual feed Carbs above a super chiller, Dart Pro 1 Alum heads, high capacity oil cooler Diamond plate flooring in engine compartment. Runs on pump gas. All performance internal components from Jesel to the High performance ignition system from MSD to the CMI large tube, polished SS Exhaust system "
#2
http://ls1tech.com/forums/showthread.php?p=8433679
post this in the Texoma Section, you will get good feedback.
post this in the Texoma Section, you will get good feedback.
#3
Registered
Thread Starter
Join Date: Apr 2006
Location: Grand Lake (E-Dock Junior Varsity)
Posts: 3,017
Likes: 0
Received 2 Likes
on
2 Posts
wow..sooooooo customer service is out! haha.. but I dont believe the motor has a warranty. I think its okeagle25's boat.. just found some vids he posted under his username on youtube.. maybe he'll chime in..
#10
Registered
Join Date: Mar 2008
Location: Tulsa, OK
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Yup
Guys, i saw the post that masher put up too...my motor is a Beck 540, but i don't think that i would put any money in this guy's face at this point. He does build one HELL of a motor, mine runs wonderful, (940 @ 6000 on the dyno sheet), but it sounds like he MAY be having financial difficulties. It's tough out there for these guys right now, so BE CAREFUL. Beck had a flawless rep until this happened, and the fact that it's only happened once (maybe?) could mean it was a bad customer, but reading the posts it sure didn't sound like it...
BTW what boat are you looking to buy anyway with a beck in it? Pics??
BTW what boat are you looking to buy anyway with a beck in it? Pics??