Hello, Im Mike, about to buy an 86 fountain 10 meter but before I do I want to get an idea what I am getting into!

Came across a 10 meter Executioner, mint body, good TRS drives Fresh motors, just needs to be put together (one motor needs dropped in). The big thing I am looking at is there are no engine hatch covers or cockpit interior. Its going to need seats, hatch covers, and upholstery.

Looking at getting it and putting some work and money into it over the next few years. Would like to get it in the water this summer, but most likely will be a project to work on and put the extra $$ into when I have it.

I just cant pass up the deal on it!

Thanks, Any info would be great! Still kind of new to the whole boating thing, since living in Harrison Township I have been coming down with the fever!

Is all the wiring and controls good? Was it used in fresh or salt water? Try posting on the Fountain forum here as well, there are a TON of guys who can help with upholstery and any other issues. If all you have to do is drop in the motors and do some upholstery it shouldn't be too bad

Michael