Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   HTM (https://www.offshoreonly.com/forums/htm-58/)
-   -   Real Quality of HTM SR 24's (https://www.offshoreonly.com/forums/htm/286590-real-quality-htm-sr-24s.html)

racinjason65 11-13-2012 08:11 AM

[QUOTE=stirling;3813510]Jason ,can you give me the center propshaft height from your boat ?

Mine is exactly 1 inch under the lowest part of the sponsons with the drive level .

I ran the Bmax yesterday with 7 psi boost at 93 mph with a 26 pitch Bravo 1 prop ,and 1,30 ratio

Now the boat feels great ,thoug it need a lot positive trim to get the bow up ,once its up it feels very stable and true .

Thx A.J[/QUOTE

I've never measured my prop shaft height.

Call Greg at cutting Edge and give him your speed/rpm data and have him make you a similar prop as I'm running. Mine have much more lift than a Bravo, so my sweet spot on the trim guage is just above half.


All times are GMT -5. The time now is 04:35 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.