|
Originally Posted by bert4332
(Post 3013573)
The engines had over 800hrs on them. I would have swapped them out too.
|
Originally Posted by aberg
(Post 3051665)
I like to know if its some papers on it and i like to pay anyone that can get me info aboute this boat and whats done to the engines and so on...
|
someone spend some money on updating the dash and hardware.
Aberg how does it run??? |
Originally Posted by aberg
(Post 3052823)
Hello Strip =)
Have remove everything in the boat and clean it up and take the dash away and also outher panels because it vas in bad shape on some places. Going to wrap everything in real carbonfibre and then put the Hustler Logo back there it vas before and clearcoat everything. Aboute the engines i dont know and like to have more info before i do any more than refresh the heads. As i say before here im very intressded to get info from people that know any abote this boat and if the engines have been refresh in some time back????? (Looks like that) Rob:drink: |
Originally Posted by aberg
(Post 3054036)
Thanks Strip, like your boat alot and have seen your movies on Youtube a Couple of times, Its Fast:drink:
Going to take some more picks and post under its way =) LIKE TO KNOW ABOTE MY ENGINES someone must know???:readinghelp: Thinking abote this :http://www.offshoreonly.com/classifi...o32736-en.html / Aberg Thanks,I would be scared of missing parts,I would do a leak down on yours and get someone to read the computer. Rob:drink: |
Originally Posted by aberg
(Post 3054161)
Ok Rob.,
Like to have the same superchargers you have.. also plan on drive parts with Whipples Rob:drink: |
Originally Posted by aberg
(Post 3080525)
Hello Rob.
Its hard to get parts here in Sweden and if i find parts its Imported parts from Us with a high pricetag so i bye directly from Us myself. Its the 2,3 im looking after, and if you hear something just pm me. / Patrik Ill keep a look out for something.goodluck Rob try emailing Whipple see if they have a used pair , or try the blower shop in Ca ,I hear they come across used stuff and might beable to put something together.I think the guys name is Robert. I would also look at a roots style and no innercooler no cutting hatch, I bet ya could make 700+ safe, By looking at your area I'm guessing your water is cool all the time?? roots cheaper and easier to get ,more use parts out there. Make sure the intake water passages are not corroded out. |
They look good,does it have a silencer built in it?
|
its never too loud:evilb::evilb:
|
where are you putting the cupholders?
|
| All times are GMT -5. The time now is 10:24 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.