![]() |
i called you this morning :drink:
|
any 32's with surface drives for sale??????
|
Originally Posted by Katabatic
(Post 3600455)
1986 32 LE, Arnesons, Debating what power, 900's or 565's
|
32 Hustler
2 Attachment(s)
Forgot some pic's, yes there is rooster tail. With the 900's this is the fastest 32. The speed quoted by the red one for sale was unlikely and I don't believe Hustler would have rigged the steering on stand off blocks, on my boat the trim and steering cylinders were fabricated by Second Effort for my hull. The Hustler that broke the 100MPH mark had 650hp. motors and the best the factory could get out of it was 106 mph according to "Powerboat" This hull with 900hp's hit 117mph, @ 600 rpm below redline. These engines are not super charged, blower, nor turbocharged, just carburetors, built by Talon Marine in Landover,MD
|
Originally Posted by Katabatic
(Post 3600599)
Forgot some pic's, yes there is rooster tail. With the 900's this is the fastest 32. The speed quoted by the red one for sale was unlikely and I don't believe Hustler would have rigged the steering on stand off blocks, on my boat the trim and steering cylinders were fabricated by Second Effort for my hull. The Hustler that broke the 100MPH mark had 650hp. motors and the best the factory could get out of it was 106 mph according to "Powerboat" This hull with 900hp's hit 117mph, @ 600 rpm below redline. These engines are not super charged, blower, nor turbocharged, just carburetors, built by Talon Marine in Landover,MD
|
Yes it is, how have you been? So, after you grow up you get rid of the little Hustler and get a 46' Skater with turbines? Boy I can't wait to grow up!
|
Originally Posted by Katabatic
(Post 3600599)
Forgot some pic's, yes there is rooster tail. With the 900's this is the fastest 32. The speed quoted by the red one for sale was unlikely and I don't believe Hustler would have rigged the steering on stand off blocks, on my boat the trim and steering cylinders were fabricated by Second Effort for my hull. The Hustler that broke the 100MPH mark had 650hp. motors and the best the factory could get out of it was 106 mph according to "Powerboat" This hull with 900hp's hit 117mph, @ 600 rpm below redline. These engines are not super charged, blower, nor turbocharged, just carburetors, built by Talon Marine in Landover,MD
:drink: |
Did you see the late 80's 32 in the classified section a few months back? It said in ad it had 850hp with surface drives and ran around 120. It was all red and black.
Anyways how many of these 32 do you think there are in the US? I don't see many in the 90's. From what I had seen and read mine is prob one of the last built. Someone say they say a 97 but I have never seen one. Mine has the bolt on windscreen, composite/foat transom, and entire hull was vacuum baged when it was in the mold to equally push the resin in mat and lighten boat. Its also has power mcloede bolsters, and all white interier in cabin. Down fall is that I have stock 502mpi's but it ver reliable power. Runs 78 with 500hours on motors, everyday. |
Where'd that red one go???
|
Don't know, and I forget what state it was in. Have a bunch of pics
|
| All times are GMT -5. The time now is 12:25 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.