Hustler owner pics
#191
Rob, no breaks, spinning 15 1/2 " x 32 herings to 5700.Props were off Ken Bowens race 38ZR. I think they were massaged to hit top RPM on his 525 EFI's.I tried Soinc's ( aka S.K.) stock Herings. Spun them to 5200-5300.( gps 95.6 mph with S.K. in the boat)I don't mind the extra slip on Kenny's props, as a matter of fact I think they help at the drive end due to the extra slip.Gear ratio is 1:50. Best part, We can run all day at 4500 rpm's, good for 85 mph.
PKR
PKR
#193
Rob, no breaks, spinning 15 1/2 " x 32 herings to 5700.Props were off Ken Bowens race 38ZR. I think they were massaged to hit top RPM on his 525 EFI's.I tried Soinc's ( aka S.K.) stock Herings. Spun them to 5200-5300.( gps 95.6 mph with S.K. in the boat)I don't mind the extra slip on Kenny's props, as a matter of fact I think they help at the drive end due to the extra slip.Gear ratio is 1:50. Best part, We can run all day at 4500 rpm's, good for 85 mph.
PKR
PKR
I would of thought you would be running a bigger prop?are they 5 or 6 blades?
I have 1.30 gears 4blades at 760 hp turned it 6000 at 97-99. at 848hp turned a 30 5800 101-102.
I bet the cat was fun!!!!!
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#195
Registered
Joined: Mar 2007
Posts: 6
Likes: 0
From: Stillwater, MN
I just bought a '97 40 Fiore and I need to install some sort of windshield / deflector. Any ideas? The factory is not working with me at all and I am getting frustrated with them.
#200
A few upgrades made to be mentioned later!!
Added a Chart Plotter in the blank area of panel. Looking to change gauges, maybe a simple white with chrome rim or yellow rim. What do you guys think?
Added a Chart Plotter in the blank area of panel. Looking to change gauges, maybe a simple white with chrome rim or yellow rim. What do you guys think?




