|
Originally Posted by Catmando
(Post 3236535)
What class are you in Gino?
|
Not exactly an Ilmor product, but close! Here's my 1500+...
Hint, hint Ilmor... FI is where you guys should focus next: http://i178.photobucket.com/albums/w...cs/Engine1.jpg http://i178.photobucket.com/albums/w...cs/Engine2.jpg :drink: |
Originally Posted by SS930
(Post 3246068)
Hint, hint Ilmor... FI is where you guys should focus next:
|
Looking forward to seeing what you guys come up with... these V10's love the boost and are super reliable under pressure! :cool:
|
Originally Posted by ILMORdude
(Post 3246913)
:party-smiley-004:
|
I think that the IndyCar program has some of the guys a bit busy right now. I guess everyone has their priorities. Mine's getting back in the water in a few weeks....
|
2007 Eliminator Daytona Coupe w/ILMOR 625's
3 Attachment(s)
Been on this forum for a few years and just now found the Ilmor section. Guess I'm not very observent.
I have a 2007 Eliminator Daytona Coupe with twin Ilmor 625's and Teague platinum drives. I've seen 123mph in ideal conditions and with 5 blade labbed mercs, but typically run 4 blade stock mercs to be easier on the drives and don't throw blades on the stock mercs (typically can see teens w/stock 4 blade props). Getting antsy and can't wait for the weather to finally break here in the east. Attachment 444392 Attachment 444393 Attachment 444394 |
Originally Posted by Adrenaline Junkie
(Post 3364789)
Been on this forum for a few years and just now found the Ilmor section. Guess I'm not very observent.
I have a 2007 Eliminator Daytona Coupe with twin Ilmor 625's and Teague platinum drives. I've seen 123mph in ideal conditions and with 5 blade labbed mercs, but typically run 4 blade stock mercs to be easier on the drives and don't throw blades on the stock mercs (typically can see teens w/stock 4 blade props). Getting antsy and can't wait for the weather to finally break here in the east. Attachment 444392 Attachment 444393 Attachment 444394 |
Originally Posted by Catmando
(Post 3365389)
Isn't that Coupe #1? I saw it in Powerboat mag, gorgeous colors and I love the coupe, great idea from my friend Bob Leach. The new Indy drive can handle up to 1000hp so you might soon see a bigger motor than the 710 to move up to. Stay tuned on this forum!!
This hull loves speed. Really doesn't start singing until about 110-115mph. 1k hp would be ridonkulous on this rig. |
Originally Posted by Adrenaline Junkie
(Post 3365984)
Actually I believe the Colledgewood Coupe is #1, but mine was shortly after that (originally built for John Harrah, but I purchased it with 10 hours on it). The colors are similar, but slightly different (some tangerine and crushed pearl in mine).
This hull loves speed. Really doesn't start singing until about 110-115mph. 1k hp would be ridonkulous on this rig. 36' Nortechs MTIs and Skaters run at least 140 with 900hp motors so I would expect your boat to run similar numbers with that power. |
| All times are GMT -5. The time now is 11:42 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.