New Engine for the 28' Joker
 

We are building a 555 ci engine. We are using a Gen 6 block, lined honed mains, bored and torqued plate honed to 4.560 bore, 68 lb light weight 4340 Eagle crank with 2.100 rod journals, 6.385 H beam Eagle rods, flat top Diamond pistons that are coated on the skirts, Compression ratio will be 9.5 to 1, we will deck the block so that the piston is at zero deck. We will use a set of cnc ported 320 cc aluminum heads, a Canton 10 qt power pan and Holley fuel injection with 50 lb per hour injectors, the engine will be tuned using a Mefi 4b ecu and wiring harness. As the project progresses we will post updates. We will also use our new 8 # flywheel. The rotating assembly will be internally balanced.

More pics of Joker engine
 

More pics

Can I please have the old engine.? Pretty please.:D

very nice Mr. Crockett...........

Looks like you will have a very strong engine. Naturally aspirated? How much power do you expect?

Looking good Tyler, This will make a new Joker owner very proud.

Looks killer!!! what HP are you looking for? Thanks again for all your help on my new motors and your ECM Programs.

Mark Kilroy

I plan on 700 HP anything over that will be free. :D

I built a carburator engine like this and made 700 HP but we will fuel inject this one and use a Mefi 4 b ecu.

We can build a mate to this one if someone has twins. :D

Frank are you coming up to the Point Plesant, NJ race it should be your water there.

Yes just ask for Brian :D

Sweet!!

Looks good Tyler! Thanks for the pictures.

are the throttle body and fuel rails from holley also ? I just bought the same intake in a tall deck version and am still planning the injection setup.

yes it's all from Holley

I have a brand new mefi4 and harness for sale if intrested.

Tyler ran out of cake:D

Hmmmmmm I could use some cake.

Update
 

Here are some more pic's of the engine. We decked the block to 9.780 so we will have 0 deck. I picked up the new cnc Dart heads today and will mill them to 114cc so we have 9.5 to 1 compression.

More pics
 

more

Thanks for the update. Man that thing is looking good. Your shop is clean!

When do you expect to finish? What speed?

Just about complete. Tyler will post pics this week. She got painted this weekend!

Looking good , can't wait to see dyno numbers!

Cleanliness is a big step towards building a motor that will last, Kudos on the nice facility Tyler.:cool:

Get er done!

Does Crockett charge an extra $10K for the Mercury Blue? :D

Tyler any Dyno numbers?

Merc 700+ efi. Should be great for my new F1 Motor!:cool-smiley-026:

are you using a hdy roller from crane or a solid roller:D

Iwas going to say the same thing about his shop, very clean!!!

Just as clean in person.And when they work on your boat they keep it clean also.

Tyler ???? Isn't he in jail? Dave:D

Huh?

I figured you would put on some Merc labels and seals and claim its a 500. Isn't that a Miklos trick? ;)

Yea that sounds right. I had to counter him / a West Coast HP600.

I got out today they only held me for a hour. And all the racers that did not help me get out I am bringing those kids that don't get to go to summer camp to the race in St. Clair and let them drill holes in boat bottoms that's more fun than sitting around a camp fire anyday. :D

Tyler love your signature!

:D I will send some more pic's of the engine we painted all the acc last night.