28' 6" OAL. Same bottom as the 2750 NuEra and 28 EVO.
There is no motor or drive/gimbal. It does have trim tabs. The boat sits exactly how it's shown in the pics.

as much as it wold be a really cool machine to have..... it would cost a lot to convert for pleasure and with the throtle in the center console and the wife with it in hand....... id never go anywhere..... grins

Called on it and seems its been sold....Sooooo who bought it?

Not sure who got this one, but I know where you can get a brand new SVL, hull only right now, but can be rigged to your pleasure.

Not sure who bought it but I heard it went northeast, Maryland I think.

There is a thread on Boatfreaks. http://forums.boatfreaks.org/showthread.php?t=22584

It's in Delaware.

Yes the boat has been sold and is owned by Diamond Performance.

Update ... The boat has been in my shop most of the winter ... Bill and I have rerigged the entire boat all cables and switch panels have been replaced ( salt water ) ... the power will be a 525 with an SCX imco drive / S/C lower . Should be out on the Chesapeake Bay this season as well as a few poker runs . The boat is legal to race with the OPA group ... might see it in a race or 2 ...

Engine as received from Mercury Racing ... had to fabricate new stringer plates for the new style offshore mounts also the boat last raced with a NXT drive ... had to fill and redrill stringers for the current Bravo set-up ... We installed the engine last weekend ... talk about a tight fit ... had to be installed sideways with the headers removed ... then turn 45 degrees once in the compartment ... Why is the hatch cut out so small ? lol

Tail pipes on order from CMI and Imco should have us a drive in a week or so ... Getting closer to being back on the water !

They must use that technique when installing the Ilmors in the EVO Sheeesh!

I was about a 1/16" of an inch from needing a little grease on this one and I don't have that deck hole arrangment

Looks like it will be fun for you when done.

Dave