74 Maltese
#23
Registered
VIP Member
Maltese Restoration
Good Luck Tom! Anything we can do to help let us know. My Dad and I are doing #17 as we speak. My Dad has become quite the expert on the Maltese and having owned an original since 1982 I pretty much know this boat inside and out.
Best of luck and thanks for keeping the legend alive, there is no better boat out there.
Jeff and Dennis
Best of luck and thanks for keeping the legend alive, there is no better boat out there.
Jeff and Dennis
#24
Gold Member
Gold Member
Good Luck Tom! Anything we can do to help let us know. My Dad and I are doing #17 as we speak. My Dad has become quite the expert on the Maltese and having owned an original since 1982 I pretty much know this boat inside and out.
Best of luck and thanks for keeping the legend alive, there is no better boat out there.
Jeff and Dennis
Best of luck and thanks for keeping the legend alive, there is no better boat out there.
Jeff and Dennis
#25
Registered
Thread Starter
Jeff and Dennis,
Is your boat the one that had the volvo dp drives on it? At least I think it was dp's, know for sure it was the swedish volvo's with trim. If so and you did away with the volvos I am looking for shield parts
Is your boat the one that had the volvo dp drives on it? At least I think it was dp's, know for sure it was the swedish volvo's with trim. If so and you did away with the volvos I am looking for shield parts
#26
Registered
Thread Starter
Jeff n Dennis,
I just went back over your resto thread. You are reusing your drives (270T) I am using the SP/DP shields (would like to end up with dp drives). So for the most part stuff you have won't work with what I am using. However, I read where you replaced you windshield. I need the 2 side panels and aluminum plates to connect to the front piece. I can make the plates if need be. Thanks, Tom
I just went back over your resto thread. You are reusing your drives (270T) I am using the SP/DP shields (would like to end up with dp drives). So for the most part stuff you have won't work with what I am using. However, I read where you replaced you windshield. I need the 2 side panels and aluminum plates to connect to the front piece. I can make the plates if need be. Thanks, Tom
#27
Gold Member
Gold Member
You may be thinking of this one. It was Bobs [wideawake] Maltese, he sold to Ralph Crocker back here in Michigan. This one has the Volvo dp drives, & power trim..